Dinesh Irrigation Private Limited

Size	40 mm to 315 mm
Pressure Rating	PN 2.5 TO PN 10
Brand	DINESH
Length	6 Meter
Color	Grey
Country of Origin	Made in India

Agricultural uPVC pipes resist stringent and rigorous on-site conditions in agricultural fields. The uPVC pipes ensure zero leakage and easy installation. The uPVC pipes and fittings have unique qualities like chemical resistance, fire resistance, corrosion resistance and low thermal conductivity. The pipes and fittings are ideal for applications like Portable Water Supply, Tube Well Casing, Chemical Effluent Disposal and Agricultural Irrigation.

uPVC pipes can be extruded to close dimensional tolerances, are light without being weak, rigid without being brittle and cheaper per unit volume, when compared with any other pipe material.

Brand	DINESH
Size/Diameter	20 MM TO 500 MM
Length of Pipe	6 MTR TO 1000 MTR
Pressure Rating/ PN Class	PN 2.5 TO PN 20
Material	HDPE
Working Pressure	2.5 Kg/sqcm to 20 Kg/sqcm
IS Code	4984 : 2016

Minimum order quantity: 6000 Meter

HDPE Coils are manufactured from High Density Poly Ethylene Polymers i.e. PE-63, PE 80, PE 100. HDPE Pipes are available in sizes 20 mm to 500 mm outer diameter and in pressure rating ranging from PN 2.5 to PN 16.0.

Applications:

1. Water Supply Systems

• In water supply distribution systems
• As a replacement of G.I.Pipes in Borewell application to submersible pumps.
• For suction and delivery lines of jet pumps and centrifugal pumps.
• Domestic Gas Distributions is perfectly possible.

2. Industrial applications

• Disposal of corrosive effluents chemicals and treated / untreated wastes.
• Acids and Alkalies can be transported through these pipes.
• For conveying edible oils,fruit pulps,juices,milk and other food products.
• As ducts for Air conditioning and ventilation.
• For transporting slurries of Iron Ore,Fly Ash etc.
• Under water (Submarine pipe lines) pipe lines is feasible.

3. Environmental Protection

• HDPE Pipes are also used for industrial waste treatment plants and water treatment plants.
• For drainage of sewerage.
• For disposal of sand slurry in dredging operations.

Advantages:

• Low specific weight and flexibility
• Perfect weld ability,tough and strong
• Abrasion and wear resistant
• Good chemical and weathering resistance
• Low co-efficient of Friction

Recommendations:

Depth of the Bore Pressure Class:

• Up to 55 meters 4.0 kg / cm2
• Up to 90 meters 6.0 kg / cm2
• Up to 140 meters 10.0 kg / cm2
• Up to 170 meters 12.5 kg / cm

Brand	DINESH
Size/Diameter	20 MM TO 500 MM
Length of Pipe	Up to 1000 meter
Working Pressure	2.5 TO 16 Kg/sqcm
IS Code	4984 : 2016
Color	Black
Country of Origin	Made in India

HDPE Coils are manufactured from High Density Poly Ethylene Polymers i.e. PE-63, PE 80, PE 100. HDPE Pipes are available in sizes 20 mm to 500 mm outer diameter and in pressure rating ranging from PN 2.5 to PN 16.0.

Applications:

1. Water Supply Systems

• In water supply distribution systems
• As a replacement of G.I.Pipes in Borewell application to submersible pumps.
• For suction and delivery lines of jet pumps and centrifugal pumps.
• Domestic Gas Distributions is perfectly possible.

2. Industrial applications

• Disposal of corrosive effluents chemicals and treated / untreated wastes.
• Acids and Alkalies can be transported through these pipes.
• For conveying edible oils,fruit pulps,juices,milk and other food products.
• As ducts for Air conditioning and ventilation.
• For transporting slurries of Iron Ore,Fly Ash etc.
• Under water (Submarine pipe lines) pipe lines is feasible.

3. Environmental Protection

• HDPE Pipes are also used for industrial waste treatment plants and water treatment plants.
• For drainage of sewerage.
• For disposal of sand slurry in dredging operations.

Advantages:

• Low specific weight and flexibility
• Perfect weld ability,tough and strong
• Abrasion and wear resistant
• Good chemical and weathering resistance
• Low co-efficient of Friction

Recommendations:

Depth of the Bore Pressure Class:

• Up to 55 meters 4.0 kg / cm2
• Up to 90 meters 6.0 kg / cm2
• Up to 140 meters 10.0 kg / cm2
• Up to 170 meters 12.5 kg / cm

Brand	DINESH
Size/Diameter	20 MM TO 500 MM
Length of Pipe	UP TO 1000 METER
Pressure Rating/ PN Class	PN 2.5 TO PN 16
IS Code	4984:2016
Usage/Application	WATER SUPPLY, AGRICULTURE, BORWELL
Country of Origin	Made in India

Minimum order quantity: 600 Meter

HDPE pipes are manufactured from High Density Poly Ethylene Polymers i.e. PE-63, PE 80, PE 100. HDPE Pipes are available in sizes 20 mm to 500 mm outer diameter and in pressure rating ranging from PN 2.5 to PN 16.0.

Applications:

1. Water Supply Systems

• In water supply distribution systems
• As a replacement of G.I.Pipes in Borewell application to submersible pumps.
• For suction and delivery lines of jet pumps and centrifugal pumps.
• Domestic Gas Distributions is perfectly possible.

2. Industrial applications

• Disposal of corrosive effluents chemicals and treated / untreated wastes.
• Acids and Alkalies can be transported through these pipes.
• For conveying edible oils,fruit pulps,juices,milk and other food products.
• As ducts for Air conditioning and ventilation.
• For transporting slurries of Iron Ore,Fly Ash etc.
• Under water (Submarine pipe lines) pipe lines is feasible.

3. Environmental Protection

• HDPE Pipes are also used for industrial waste treatment plants and water treatment plants.
• For drainage of sewerage.
• For disposal of sand slurry in dredging operations.

Advantages:

• Low specific weight and flexibility
• Perfect weld ability,tough and strong
• Abrasion and wear resistant
• Good chemical and weathering resistance
• Low co-efficient of Friction

Recommendations:

Depth of the Bore Pressure Class:

• Up to 55 meters 4.0 kg / cm2
• Up to 90 meters 6.0 kg / cm2
• Up to 140 meters 10.0 kg / cm2
• Up to 170 meters 12.5 kg / cm

Size/ Diameter	20 MM TO 500 MM
Pressure Rating/ PN Class	PN 2.5 TO PN 16
Material Grade	PE 100
Length of Pipe	UP TO 1000 METER
Usage/Application	Drinking Water
Color	Black
Pressure	2.5 Kg/sqcm to 16 Kg/sqcm
Connection End Type	Flange, Welded
I Deal In	New Only
Brand	DINESH
IS Code	4984:2016
Country of Origin	Made in India

HDPE pipes are manufactured from High Density Poly Ethylene Polymers i.e. PE-63, PE 80, PE 100. HDPE Pipes are available in sizes 20 mm to 500 mm outer diameter and in pressure rating ranging from PN 2.5 to PN 16.0.

Applications:

1. Water Supply Systems

• In water supply distribution systems
• As a replacement of G.I.Pipes in Borewell application to submersible pumps.
• For suction and delivery lines of jet pumps and centrifugal pumps.
• Domestic Gas Distributions is perfectly possible.

2. Industrial applications

• Disposal of corrosive effluents chemicals and treated / untreated wastes.
• Acids and Alkalies can be transported through these pipes.
• For conveying edible oils,fruit pulps,juices,milk and other food products.
• As ducts for Air conditioning and ventilation.
• For transporting slurries of Iron Ore,Fly Ash etc.
• Under water (Submarine pipe lines) pipe lines is feasible.

3. Environmental Protection

• HDPE Pipes are also used for industrial waste treatment plants and water treatment plants.
• For drainage of sewerage.
• For disposal of sand slurry in dredging operations.

Advantages:

• Low specific weight and flexibility
• Perfect weld ability,tough and strong
• Abrasion and wear resistant
• Good chemical and weathering resistance
• Low co-efficient of Friction

Recommendations:

Depth of the Bore Pressure Class:

• Up to 55 meters 4.0 kg / cm2
• Up to 90 meters 6.0 kg / cm2
• Up to 140 meters 10.0 kg / cm2
• Up to 170 meters 12.5 kg / cm

Size/Diameter	1.25 INCH TO 12 INCH
Length of Pipe	6 m
Pipe Joint type	Sol fit
Material	PVC
Working Pressure	2.5 Kg/sqcm to 10 Kg/sqcm
Brand	DINESH
Usage/Application	Agricultural
IS Code	4985:2000

Agricultural uPVC pipes resist stringent and rigorous on-site conditions in agricultural fields. The uPVC pipes ensure zero leakage and easy installation. The uPVC pipes and fittings have unique qualities like chemical resistance, fire resistance, corrosion resistance and low thermal conductivity. The pipes and fittings are ideal for applications like Portable Water Supply, Tube Well Casing, Chemical Effluent Disposal and Agricultural Irrigation.

uPVC pipes can be extruded to close dimensional tolerances, are light without being weak, rigid without being brittle and cheaper per unit volume, when compared with any other pipe material.

Material	PVC
Size/ Diameter	110 mm to 315 mm
Length of Pipe	6 m
Brand	DINESH
Pipe Joint type	Ring fit/ Push fit
IS Code	IS 15328 (2003
Usage/Application	DRAINAGE AND SEWAGE
Country of Origin	Made in India

Underground Drainage PVC-U Pipes (Self-fit type/ Ring-fit type) are manufactured as per IS 15328. These pipes are available in sizes from 110mm to 315mm with different stiffness classes. They come with solid wall and are compatible with regular PVC fittings. Dinesh Drain Pipes are supplied with one side socket ends and in Orange (Golden Brown) colour.

Size/ Diameter	20 mm to 500 mm
Pressure Rating/ PN Class	PN 2.5 to pn 20
Material Grade	PE 80
Length of Pipe	UP TO 1000 METER
Usage/Application	Drinking Water
Color	Black
Connection End Type	Welded, Flange
I Deal In	New Only

Minimum order quantity: 600 Meter

HDPE Coils are manufactured from High Density Poly Ethylene Polymers i.e. PE-63, PE 80, PE 100. HDPE Pipes are available in sizes 20 mm to 500 mm outer diameter and in pressure rating ranging from PN 2.5 to PN 16.0.

Applications:

1. Water Supply Systems

• In water supply distribution systems
• As a replacement of G.I.Pipes in Borewell application to submersible pumps.
• For suction and delivery lines of jet pumps and centrifugal pumps.
• Domestic Gas Distributions is perfectly possible.

2. Industrial applications

• Disposal of corrosive effluents chemicals and treated / untreated wastes.
• Acids and Alkalies can be transported through these pipes.
• For conveying edible oils,fruit pulps,juices,milk and other food products.
• As ducts for Air conditioning and ventilation.
• For transporting slurries of Iron Ore,Fly Ash etc.
• Under water (Submarine pipe lines) pipe lines is feasible.

3. Environmental Protection

• HDPE Pipes are also used for industrial waste treatment plants and water treatment plants.
• For drainage of sewerage.
• For disposal of sand slurry in dredging operations.

Advantages:

• Low specific weight and flexibility
• Perfect weld ability,tough and strong
• Abrasion and wear resistant
• Good chemical and weathering resistance
• Low co-efficient of Friction

Recommendations:

Depth of the Bore Pressure Class:

• Up to 55 meters 4.0 kg / cm2
• Up to 90 meters 6.0 kg / cm2
• Up to 140 meters 10.0 kg / cm2
• Up to 170 meters 12.5 kg / cm

Material	HDPE
Shape Of Dripline	Cylindrical
Automation Grade	Manual
Color	Black
Country of Origin	Made in India

Drip Irrigation Systems are available as per the    customer's requirement. On Preordering.

SIZE	63 MM TO 315 MM
RING TYPE	ELASTOMERIC
LENGTH	6 METER
COLOUR	GREY
MATERIAL	PVC
Country of Origin	Made in India

Minimum order quantity: 1000 Meter

Conforming to IS 4985 

This unique range of PVC-U pipes  are specially designed for higher diameter requirements and eliminate the need for solvent cement. The sealing ring ensures 100% leak-proof joints and easy installaon. The entire range comprises sizes from 63 mm to 315 mm diameter; in 2.5,4,6,8 and 10 kgf/cm2 working pressure classes.

Material	PVC
Size/ Diameter	63 MM TO 160 MM
Length of Pipe	3 m
Brand	DINESH
Pipe Type	Type B
Pipe Joint type	Ring fit/ Push fit
IS Code	13592-92
Usage/Application	DRAINAGE AND SEWAGE FOR HOMES
Country of Origin	Made in India

Minimum order quantity: 200 Piece

we are offering  SWR Ringfit Pipes. We use the best quality raw material in the manufacturing of product under supervision over quality tester. They test the product on quality parameters.

Size	3 inch to 10 inch
Material	HDPE OR PP
Type of Tee	Reducing
End Connection Type	BUTTWELD OR FLANGE END
Surface Finish	Finished Polished
Color	BLACK
Country of Origin	Made in India

Injection moulded HDPE Butt Fusion Reducing Tee for HDPE pipes, available 50-400mm. high quality warranted with 15 years, competitive wholesale prices, stock available for regular sizes, prompt delivery available. Contact us for more details of HDPE Butt Fusion Reducing Tee!!