Dinesh Irrigation Private Limited

A combination to formulate perfect uPVC is achieved with the right selection of resins, heat stabilizers, lubricants, processing aids, impact modifiers and essential additives. With all ingredients and process parameters taken in the correct proportion.

Physical Properties
Found to be excellent for shallow and deep bore wells, as:
1. They have greater strength to weight ratio.
2. They have good di – electrical properties.
3. They can withstand rating temperatures ranging from 50° C to 70° C.
4. They are easy to install, due to superior threaded joints.

Chemical Properties
1. They have excellent resistance to salt, acid, alkali, oil, fat etc.
2. They are capable of handling water and pH values ranging from 2 to 12.
3. They are also resistant to all kinds of acids used in well-generation.
4. They are resistant to all types of weather-effects.
5. They are resistant to corrosion, erosion and encrustation.
6. They possess higher resistance to chemicals.

Benefits

• Immune to galvanic or electrolytic erosion.
• No Surface corrosion.
• No protective coating required.
• Not affected by acids, alkalis, oils Et fats.
• Better fire resistance due to self -extinguishing nature of uPVC.
• Very smooth inside and outside surfaces, so lower frictionat losses.
• No encrustation.
• Does not support bacterial growth.
• Trapezoidal threads make joints easy to handle and install.
• No skilled labor required.
• Continuous ribs on screen with horizontal slots, allow over double the entry.
• Light-weight ; hence easy to handle and transport.
• Safe for potable water transportation.
• Most economical in installation.
• Reduces power consumption in the long run.
• Maintenance-free.
• No painting required.

It is made of unplasticized Polyvinyl Chloride, Suspension grade, K value 65-67, a bulk polymer suitable for pressure pipes.UPVC has properties which allow it to be used as a replacement for and often advantage over traditional material such as cast iron,asbestos cement etc. available in Type cm, DN 100-200 mm, Type cs, DN 150-200 mm & rs DN 150-200 mm.

Product Range:

• Plain- 20 mm to 315 mm
• Selfit- 63 mm to 315 mm

Advantage:

• Smooth bore for better flow properties
• Do not support bacterial growth
• Chemical and Corrosion resistance
• High Impact strength
• Easy installation
• Long lasting
• Light weight
• Elegance
• Overall economy

It is made of unplasticized Polyvinyl Chloride, Suspension grade, K value 65-67, a bulk polymer suitable for pressure pipes.UPVC has properties which allow it to be used as a replacement for and often advantage over traditional material such as cast iron,asbestos cement etc. available in Type cm, DN 100-200 mm, Type cs, DN 150-200 mm & rs DN 150-200 mm.

Product Range:

• Plain- 20 mm to 315 mm
• Selfit- 63 mm to 315 mm

Advantage:

• Smooth bore for better flow properties
• Do not support bacterial growth
• Chemical and Corrosion resistance
• High Impact strength
• Easy installation
• Long lasting
• Light weight
• Elegance
• Overall economy